Product features:
PMMA I microcomputer intelligent operating system, powerful function
Large-size capacitive touch screen, you can check the operating parameters and working status diagrams of the equipment in real time during the working phase
Possess 8 fixed programs + 6 self-defined
positive pressure pulses, 6 levels can be set The cold air discharge program ensures the complete discharge of cold air.
After the sterilization, 6 levels of pressure relief rate are optional. It
has three levels of authority management: engineer, administrator and operator. The
reference standard YY1007-2018
adopts high-strength upper and lower flanges, which greatly enhances the use safety and reliability
Humanized design:
anti-scalding design of the whole machine, which is both heat-insulating and beautiful.
Classic handwheel door opening structure, with double protection of pressure mechanical self-locking and closed cover self-test.
One-button electric drainage, more convenient operation.
100-hour countdown appointment function
. The boiling point setting function ensures that the instrument can heat up to the required temperature at high altitudes. The
standard configuration includes a rapid cooling system of condenser + air cooling + secondary water cooling, which shortens the waiting time for opening the cover. Standard configuration
includes 1 waterproof socket, 2 485 interfaces and G1 /2A standard detection threaded hole
Safety guarantee:
fault detection function, over-temperature shutdown protection, water cut-off protection, over-pressure self-leakage protection, anti-scalding protection, overload protection, short-circuit protection, leakage protection, independent electronic over-pressure and other multiple safety guarantees
Optional accessories
Exhaust steam filtration system: 0.2μm pore size temperature-resistant and pressure-resistant filter
Special printer, which can realize the printing of date, time, temperature, sterilization process and curve Sample
temperature sensor: realize the printing of F0 value
Verification hole adapter
Volume: 60L
Temperature resolution: 0.1°C
Temperature fluctuation: <﹢1°C
Temperature uniformity: ≤1°C
Melting temperature: 50~100°C
Holding temperature: 40~60°C
Sterilization time: 0~120min (0~6000min can be customized)
Melting time: 0~6000min
Holding time: 0~6000min
Appointment time: 99Hrs60min
Design pressure: 0.38MPa
Working pressure: 0.22MPa
Pressure gauge display range: 0~0.4MPa (level 1.6)
Heating power: 3.2 kW
External dimensions: 535×640×1075mm
Internal dimensions: Ø400×635
Use height: 509mm
Mesh basket size: Ø360×230×2
gross weight (kg): 118
net weight (kg): 100
outer packaging size (mm) length x width x height: 780 x 680 x 1250
Function configuration table:
configuration name | ●Standard configuration ○Optional configuration —Not configurable |
Mechanical self-locking device | ● |
Closure Inspection System | ● |
Over temperature protection function | ● |
Water cut protection system | ● |
Overpressure Protection System | ● |
Overpressure automatic pressure relief function | ● |
Fault self-test function | ● |
Appointment function | ● |
Melt insulation function | ● |
working status diagram | ● |
Pulse vacuum function (with preheating function, automatic water filling function, overpressure protection function, air filter, water filling port, etc.) | — |
Rapid cooling (air cooling) | ● |
Tray: can be placed at the bottom of the basket | ○ |
Verification Seal Adapter: Used to install wiring for a wired temperature verification system to assure seal status | ○ |
Special printer, can print time, temperature and process curve in real time (optional sample probe can print F0 value), with storage function, standard U disk | ○ |
Đánh giá
Chưa có đánh giá nào.