PHARMA TEST – PTB 330

Liên hệ

Hãng sản xuất: PHARMA TEST

Model: PTB 330

Chỉ tiêu phân tích:

Ứng dụng:

Features

Features

The main features of the PTB 330 instrument are:

  • Tablet hardness testing in full compliance to USP <1217> and EP <2.9.8> Pharmacopeia
  • 5 results of the same sample: thickness, width, diameter (length), hardness and weight (via connected external analytical balance)
  • Dual force mode instrument with linear speed increase and linear force increases modes
  • Statistical calculations of mean value, absolute and relative standard deviations, minimum and maximum result
  • Fingerprint sensor for immediate and secure login
  • Networking capabilities (optional)
  • Multiple point validation procedure built-in
  • Programmable print-out of force increase curve
  • Graphical user interface with clear operator instructions
  • Set to test tension strength of oblongs and caplets available

Advantages

  • Select either linear force or linear speed increase (dual mode selection)
  • Stepless adjustment of the force or speed increasing rate
  • User management with fingerprint sensor system
  • Method management with “teaching” system
  • Entry of time and date
  • Test start functionality to start testing with minimal preparation
  • Automatic re-start facility to speed up the testing sequence
  • Directly connectable to LIMS or other network options
  • Validation and calibration program for the measurement stations
  • Dual point adjustment of the load cell for the hardness test station
  • Multiple point validation (calibration) up to 30 or 50kg
  • Programmable print-out of force increase curve
  • Serial data transfer via RS-232 interface
  • Test program for soft gelatin capsule testing by setting up a testing distance

Technical Specifications

Parameter Specification
Hardness testing range PTB 330: 2.0 – 300.0 N
PTB 330-500: 5.0 – 500.0 N
PTB 330-1000: 10.0 – 1,000.0 N
Hardness accuracy Better than ±1 N
Hardness resolution 0.1 N
Thickness testing range 2.00 – 35.00 mm, expandable to 70mm
Thickness accuracy Better than ±0.02 mm
Width & diameter testing range 2.00 – 35.00 mm, expandable to 70mm
Width & diameter accuracy Better than ±0.02 mm
Thickness, width & diameter resolution 0.01 mm
Weight measurement By external METTLER TOLEDO or Sartorius balance (balance not included in standard supply scope), individual or average weight
Measuring units Thickness, diameter and width selectable between millimeter (mm) and inches (IN); Hardness selectable between Newton (N), Kilopond (kp) and Strong Cobb (Sc)
Force mode Selectable: linear force increases or linear speed increase
Force rate 5 – 250 N/sec. (linear force increase);
5 – 250 mm/Min. (linear speed increase)
Display color LCD, backlit
Data entry Keypad
Number of users Up to 100
Fingerprint sensor Up to 40 different user fingerprints can be saved
Number of methods Up to 100
Number of tests per run Up to 200 tests in one run
Interface 2 x RS-232 serial port to connect a PC or Epson TM-U220B ticket printer, 1 x USB port type B for data export and firmware updates
Instrument housing Stainless steel (304) to meet GLP requirements
Power 115/230 Volt AC, 50/60 Hz
Installation requirements Ambient Temperature 15-35 °C
Relative Humidity 15-80 %rH
Desk with at least 50 kg working load. All around the instrument at least 10 cm free distance to walls or other equipment. Free access to the mains power plug and switch.
Instrument dimensions Approx. 450 x 300 x 250 mm (Length x Width x Height)
Packaging dimensions Approx. 550 x 400 x 350 mm (Length x Width x Height)
Net / gross weight Approx. 9 kg / 13 kg (without optional accessories)
Certification All components certified to USP / EP requirements
CE / EMC certification All CE / EMC Certification provided
Validation All IQ & OQ documents included

PTB 330

5-in-1 Tablet Testing Instrument

The 5-in-1 tablet testing instrument PTB 330 is a dual test mode instrument to measure five different parameters of one sample. Hardness, diameter (or length), thickness, width and the weight of tablets can be determined here. Using the unique fingerprint sensor, logging into the instrument is easier and more secure than ever before. The instrument is made in strict compliance with the EP <2.9.8> and USP <1217> Pharmacopoeia.

Measurement of 5 different parameters

PTB 330 features one testing station to determine the thickness, width, diameter (or length) and the hardness of tablets. Furthermore, PTB 330 allows connecting a METTLER TOLEDO or Sartorius analytical balance to measure the weight of the samples as well. PTB 330 offer two modes for the weight measurement: either weigh each sample individually, before placing them in the testing station or weigh all samples together and calculate the average weight.The bottom piece of the test station is switchable. It can be replaced with a version featuring a groove for an optimum positioning of tablets and oblongs which tend to move during the test procedure. The measuring units can be selected from mm or Inch and KP (Kilopond), N (Newton) or Sc (Strong Cobb).

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “PHARMA TEST – PTB 330”

Sản phẩm tương tự

PHARMA TEST – PT-DDS4

Hãng sản xuất: PHARMA TEST

Model: PT-DDS4

PHARMA TEST – PTZ 100 and PTZ 300

Hãng sản xuất: PHARMA TEST

Model: PTZ 100 and PTZ 300

PHARMA TEST – WinDiss ARGUS Dissolution Software

Hãng sản xuất: PHARMA TEST

Model: WinDiss ARGUS Dissolution Software

PHARMA TEST – PT-LT

Hãng sản xuất: PHARMA TEST

Model: PT-LT

PHARMA TEST – ADS-L 620

Hãng sản xuất: PHARMA TEST

Model: ADS-L 620

PHARMA TEST – DFC-620SP

Hãng sản xuất: PHARMA TEST

Model: DFC-620SP

PHARMA TEST – PTWS 120D

Hãng sản xuất: PHARMA TEST

Model: PTWS 120D

PHARMA TEST – PTWS 120S

Hãng sản xuất: PHARMA TEST

Model: PTWS 120S

0936095519