TESTEX – Button snap pull tester TF145
Liên hệ
Hãng sản xuất: TESTEX
Model: Button snap pull tester TF145
Chỉ tiêu phân tích:
Ứng dụng:
- Application
- The test principle
- Features
- Included Accessories
- Optional Accessories
- Mô tả
- Đánh giá (0)
Application
Snap Tester (button pull test machine), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).
This snap button pull test machine consists of an upper snap clamp, a lower fabric clamp as well as a force gauge mounted on a stand, and a hand wheel on the bottom of the snap tester. Besides, all these fasteners pull out test equipment which allows fine control with convenient operation, which makes the pull-out test equipment very easy to use.
Grip the snap component by the Upper Snap Clamp and fix the garment to the lower Fabric Clamp. Then the operator can apply a specific force by turning the hand wheel. Finally, the holding force or the breaking strength can be recorded. The capability of the snap tester can be enhanced with the clamps & accessories for testing other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others. Apart from those mentioned before, you will find more applications for this push-pull test equipment for your testing purpose.
The test principle
The upper and lower clamps hold the parts of the garment. The clamps move at a set speed until the part comes off. Record the shedding strength and the way. We should select suitable clamps according to the different buttons.
Features
1 Suitable for manufacturers and buyers to use
2 Suitable for children’s clothing, and soft toys
3 Suitable for product design and production inspection
4 The tension is more accurate due to the equipment of the hand wheel
5 Easy to operate, so no need for training the staff
6 Sturdy and durable, thus require less maintenance
TESTEX Button snap pull testers are sold to many countries worldwide with an export history of 12 years, a good reputation, as well as reliable quality.
Included Accessories
1 Lower Fabric Clamp, Lever Armlocking (on the machine)
1 Upper Stud Clamp
1 Upper Snap Clamp
1 Three-Pronged Clamp
1 Two-Pronged Clamp with screw
1 Lower Grasp Button Kit (on the machine)
1 Long Nose Vice Grip
1 Safety Goggles
Optional Accessories
Optional Accessories
Sundoo Force Gauge (300 N, resolution 2 N, accuracy +/-1%FS) weight
Weight
| 30 kg |
Dimensions
| Length: 280 mm | Width: 280 mm | Height: 750 mm |
Standards
| Standard | 16 CFR 1500.51-53 | EN 71-1 8.4.2.3 | |
| Optional Standard | ASTM F963 8.9 | ISO8124-1 5.24.6 |
Button snap pull tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a button pull tester applies for compression and tensile testing of small samples(special attachments are available). The button pull test standard includes ASTM F963, EN 71-1, etc. Snap tester will help you a lot when you do push and pull test. Come and contact us for more information about fastener pull tester.
Hãy là người đầu tiên nhận xét “TESTEX – Button snap pull tester TF145”
Sản phẩm tương tự
Hãng sản xuất: TESTEX
Model: Bursting Strength Tester TF142A/B
Hãng sản xuất: TESTEX
Model: Wyzenbeek Abrasion Tester TF212
Hãng sản xuất: TESTEX
Model: IULTCS Rubbing Fastness Tester TF414
Hãng sản xuất: TESTEX
Model: Water-cooled Light & Weather Fastness Tester TF422
Hãng sản xuất: TESTEX
Model: Rubbing Fastness (Gakushin) Tester TF413
Hãng sản xuất: TESTEX
Model: UV Accelerated Weathering Tester TF424
Hãng sản xuất: TESTEX
Model: Brush or Sponge Pilling Tester TF222
Đánh giá
Chưa có đánh giá nào.