TESTEX – Tensile Tester TF001

The Specification of  Tensile Testing Machine TF001

Test capacity: 250kg, 500kg

Test level: class 1

Max travel: 800 mm (without fixture)

Travel accuracy: ≤1%

Traverse speed: 1mm/min ~ 500mm/min

Speed accuracy: ≤1%

Test force range: 0.2%~100%FS

Force accuracy: ≤1%

Power：220 V  50Hz 3A  400W    110 V   60Hz 5A   400W

Weight： Net weight: 85kg    Packed weight: 140kg

Dimensions: Machine: 680x500x1450 mm   Packed: 780x600x1590 mm

Standard fixture and corresponding standards：

Manual stretching fixture should be equipped with 25×25, 25×50, and 25×75 clips

ISO 9073-3 ISO 13934-1 ISO 13934-2

ISO 13935-1 ISO 13935-2 ASTM D5034

ASTM D5035

Optional fixture and standards:

The Pneumatic tensioning fixture & footswitch are equipped with：25×25，25×50，25×75 clips

Optional fixture and corresponding standards：

U-shaped Fixture       ASTM D4964

Yarn Fixture I          SO2062

Bursting Fixture        ASTM D6797  FZ/T 01030  GB/T 19976

Leather Tearing Fixture  ISO 3377-2

Standards of the optional manual tension fixture

ISO 9073-4   ( require 25x100mm clips)  ISO 3377-1

ISO 13936-1 ISO 13936-2

ISO 13937-2 ISO 13937-3 ISO 13937-4

ISO 20932-1 (need to match the linear fixture which needs to be changed by your choice about the type of fixtures)

ISO 4674-1 GB/T 3917.3 GB/T 3917.5  GB/T 3923.1

Computer Configuration of Tensile Tester (Optional)

• CPU for the Intel Celeron (Celeron) 2GHz or more CPU
• Memory at least 512MB, recommended more than 1GB
• Hard disk space above 2GB
• Display resolution of 1024 × 768 or more.
• Printer compatible with the operating system (if output reports are required)
• The applicable operating system for Microsoft’s Windows XP, Windows 7, Windows 8, Windows 10
• If you need to output the report in Word format, you must install Microsoft’s Microsoft Word 2003, 2007, and 2010 versions of the software.

Standards of Tensile Tester TF001 ( Not limit )